Safe Grip USA
Keeping Tile Safe & People Standing Since 2011
Keeping Tile Safe & People Standing Since 2011
American Made Product To Treat Tile For Slip Resistence
Types of Tile & Places To Use Product
Types of Tile & Places To Use Product
It works indoors or outdoors on Ceramic and Porcelain can be used on other tiles but recommend ordering a sample bottle to test on tile before ordering the product. This is the same product used by professionals to make tile floors slip resistant. Perfect for use in bathrooms, kitchens, and front and back door entryways. Also any place kids come in wet and the flooring is tile would be a great safety option to keep them from any slip and fall.
Long Lasting - Won't Yellow - Satisfaction Guaranteed.
Product will keep tile slip resistant for 4 or 5 years depending on how often tile is cleaned and if outside.
Shelf life for this product is 9 - 10 years .
Perfect for new bathroom tile
Perfect for new bathroom tile
Our product is perfect solution for tile in your bathroom. Both for the floor and in the shower area.
Always remember our product is only for certain tiles and always check a small area before applying to full area. If you have any questions you can email us or go to our youtube channel for our installation and testing videos.
Keeping Tile Safe & People Standing Since 2011
What our customers are saying
What our customers are saying
I didn't think this product would really work, but it was cheaper than replacing my slippery shower tile, so I decided to try it. It was easy to apply and it worked with the first application. I was very happy with this product, No more slippery shower tile. Yay!
SafeGrip Treatment Instructions
SafeGrip Treatment Instructions
For best results please read the instructions BEFORE applying SafeGrip:
PRE-Test the tile: Darker colored tiles may result in a lighter color if left on to long or if SafeGrip is applied to dry not damp tile. Please test a small area in a corner before applying to the entire surface. Compare treated tile to untreated tile after 8 to 10 minutes depending on color of tile. Read below for information on testing for slip resistance.
1. First clean the area to be treated thoroughly with a mop and cleanser of your choice and rinse.
2. While the surface is still damp (do not use on dry surface) pour SafeGrip in the center of the area and using a brush or broom spread evenly over the entire area being treated. Allow the product to sit for 15 minutes (or shorter according to your pre-test results). Using a spay bottle for smaller areas and a pump sprayer for larger areas help to make sure area is covered completely and can make for an easier install but not required but recommended.
3. When the 15 minutes has passed, test the slip resistance by pushing down hard with your fingers and sliding them across the surface. If more slip resistance is desired allow to sit for an additional 2 to 3 minutes (please remember that for darker tile, the longer the product remains on the surface it may cause the tile to appear lighter- again go back to your Pre-Test results).
4. Rinse immediately with water. This is an important step as the SafeGrip will continue to process and may result in a color change if left on to long.
Your surface is now ready for use!
For Exterior Applications: For best results on exterior applications always apply SafeGrip in the early morning or after dark. Sun, Heat and Wind may cause premature drying and effect the results!
SafeGrip USA - 1 Gallon
SafeGrip USA - 1 Gallon
Product is for Ceramic and Porcelain Tile to create micro etching of the tile to increase the slip resistance of the tile when it is wet. Our product is delivered through USPS and usually takes 5 to 7 day for delivery.
Product will be sent in half gallon containers.
SafeGrip USA - 1/2 Gallon
SafeGrip USA - 1/2 Gallon
Product is for Ceramic and Porcelain Tile to create micro etching of the tile to increase the slip resistance of the tile when it is wet. Our product is delivered through USPS and usually takes 5 to 7 day for delivery.